View previous topic :: View next topic |
Author |
Message |
Forest_biker
Joined: 16 Sep 2006 Posts: 859
|
Posted: Mon Oct 29, 2007 9:05 pm Post subject: Fetish Cycles 2007 Single Speed SOLD |
|
|
SOLD
: Used a handful of times a Fetish Cycles 2007 Single Speed $225
I built this up last Fall with used parts, rode it only a handful of times and it’s been collecting dust ever since.
The Frame:
The rear wheel is adjustable from 17 to 18 inches for the wheel base and it is also designed around disc brake (but also works with V-brakes). The horizontal dropout also allows a derailleur to be inserted if preferred. This frame is designed around a 100mm travel fork. It has a box section rear end to keep a stiff but comfortable ride. The gusseting around the head tube is for strength and also on the down tube to head tube allows this frame to be stronger than others.
Frame Specs:
Seat Tube (c-t) - 21"
Seat Tube (c-c) - 18.75"
Top Tube (c-c) - 23.5"
BB Shell - 68mm
Head Tube Size - 1 1/8"
Front Derailleur Size - 31.8
The bike is ready to ride. Some of the parts are used and could be upgraded. This frame also has a derailleur hanger and can be used as a geared bike.
Included with the frame: Most of these parts are used from previous frames
Suspension corrected rigid fork Cro Mo (Used)
Titec flat tracker handlebar
generic stem (used)
Aheadset (used)
Square drive BB
27.2 seatpost (Cane Creek Thudbuster seatpost in the photo is not included)
Old Vuelta cranks with a 34 tooth chainring(used)
Single speed chain (used little)
22 tooth Endless bike Co. cog (used little)
Mix and match V-brakes (used)
Well worn LX wheelset with Big Mamoth Fat SunRims (used)
Used tires and tubes (hold air and have decent knobs)
Worn WTB saddle (very used)
Surly Tuggnut chain tensioner
The body of the Tuggnut is investment cast in stainless steel for durability. It features a thumbscrew, for tool-free adjustments, and 2 axle holes for a wide range of fore/aft wheel positions. The Tuggnut comes with an aluminum adapter that reduces the axle hole from 10mm to 6mm, so you can use it with quick-release axles, in addition to nutted axles. We sell it as a single, because you really only need one...on the drive side. But, if you absolutely need one on the non-drive side of your rig, to achieve balance in your life, you are in luck...the bottle opener works either way.
If your looking for a brand new frame they sell them on Ebay for $150 with $40 shipping but this one is local and comes ready to ride!
Reply with questions or PM me if interested in taking a look.
I also have a Paypal account if you wanted to use a charge card.
This bike is in the Poughkeepsie area.
Chris
Last edited by Forest_biker on Thu Nov 01, 2007 9:33 pm; edited 1 time in total |
|
Back to top |
|
|
Forest_biker
Joined: 16 Sep 2006 Posts: 859
|
Posted: Tue Oct 30, 2007 4:40 pm Post subject: Frame |
|
|
I would also sell the frame and fork alone for $150.
The frame only $120.
I'll be putting it up on Ebay next week, so if you have an interest let me know.
Chris |
|
Back to top |
|
|
bike this
Joined: 13 Nov 2006 Posts: 1166 Location: YKYO
|
Posted: Thu Nov 01, 2007 10:02 am Post subject: |
|
|
I have interest in a single speed, but I think yours is too big... _________________ Shut up and ride.! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|