Find us on Facebook Follow FatsInTheCats on Twitter Follow our RSS News Feed
Home Membership Calendar Trail Building Forums Trails & Bike Shops Photos Links Contact
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups     CalendarCalendar  RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
replacement front derailleur hanger

 
Post new topic   Reply to topic    Fats in the Cats Bicycle Club Forum Index -> Repair & Maintenance
View previous topic :: View next topic  
Author Message
tim



Joined: 15 Apr 2010
Posts: 58
Location: marlboro

PostPosted: Wed Apr 23, 2014 4:12 pm    Post subject: replacement front derailleur hanger Reply with quote

so here is the question. i just tore off my front der.(in half) along with the alloy bolt on front derailleur hanger. the frame is an off brand carbon frame with a mount that has a rear facing j bend and two mounting screws. anyone have any ideas where i can grab one? already checked the nice guys at trt and bike depot and bikeway...about to try and fabricate one....just waiting to here back from the manufacturer first.
thanks for any help.


similiar to below:

http://soshanger.com/epages/box11137.sf/seca5e54f43c7/?ObjectPath=/Shops/box11137/Products/%22470843/GNT%22/SubProducts/%22470843/GNT-0001%22&ViewAction=ViewProduct
Back to top
View user's profile Send private message
ProfessorCracker



Joined: 21 Jan 2007
Posts: 726
Location: Taghkanic ny

PostPosted: Wed Apr 23, 2014 9:01 pm    Post subject: Reply with quote

Try everywhere (phone), berkshire bike and board in Good Barrington might have one.
_________________
I like big bikes and I can not lie.
Back to top
View user's profile Send private message Visit poster's website
Kevin



Joined: 09 Sep 2006
Posts: 1411
Location: Kingston

PostPosted: Thu Apr 24, 2014 8:04 am    Post subject: Reply with quote

Worst comes to worst, you should be able to find a clamp-on adapter that will accommodate your braze-on front derailleur. Provided your off brand frame has a round seat tube, measure the diameter of your seat tube and call around to shops. If all you can find is a larger diameter than your seat tube, don't rule out the use of a shim with it.

Good luck.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Fats in the Cats Bicycle Club Forum Index -> Repair & Maintenance All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
© 2016 Fats in the Cats