View previous topic :: View next topic |
Author |
Message |
TriassicDoc El Presidente
Joined: 25 Mar 2007 Posts: 1235 Location: Poughquag
|
Posted: Tue Apr 26, 2011 9:29 pm Post subject: Front Wheel not setting right ? |
|
|
I have always had problems with my front wheel. Basically, something happened with the original skewer and I could never get it tight enough, so the wheel kept falling off. We ended up [and by we, I mean the bike mechanic ] placing washers in with the skewer, which worked really well--the wheel stays on. I got new Avid Elixir brakes with a larger rotor (not sure if that makes a difference), rode the bike a couple of times and didn't notice anything strange. Bike ended up back in the shop for a while, came back, and now the front wheel won't turn when it is tight. When the skewer is loosened, it spins freely. It is not the brake caliper, that has been tested. When the skewer is tightened, the rotor is rubbing against the caliper AND the fork. There are rub marks, so I am not crazy (I don't think).
So, I am wondering what to do next and first I would like to know if anyone has ever had this problem and how they resolved it? I was thinking about removing these washers and trying something flexible ? like, a thin, rubber washer? Plastic?
Note: I am very poor and minimally employed at the moment, so DIY-MacGyver solutions are most appreciated! Right now, the bike is unrideable and probably not safe. Poor Soma! |
|
Back to top |
|
|
tom church
Joined: 20 Sep 2006 Posts: 533 Location: Beacon
|
Posted: Wed Apr 27, 2011 11:11 am Post subject: |
|
|
First off I would say that if the skewer does not work...do not modify it. A modified skewer is dangerous. There is some other underlying problem here.
Is this a suspension fork? What brand and model?
Where on the caliper is it rubbing? (fork side I assume but is it rubbing on the top?
When you had the new brakes put on was a new adapter used (if one was needed)?
If you can get down to Beacon, bring it in after 4pm when I am there. I'll take a look at it for you and at least try to get you a diagnosis on it. We close at 5 today but are open till 7 the rest of the week.
Tom _________________ Tom Church |
|
Back to top |
|
|
TriassicDoc El Presidente
Joined: 25 Mar 2007 Posts: 1235 Location: Poughquag
|
Posted: Wed Apr 27, 2011 12:50 pm Post subject: |
|
|
thanks... I won't be anywhere near Beacon, but I will probably bring it over to my LBS tomorrow. |
|
Back to top |
|
|
tom church
Joined: 20 Sep 2006 Posts: 533 Location: Beacon
|
Posted: Wed Apr 27, 2011 1:51 pm Post subject: |
|
|
yeah...best idea, there is something else going on here... _________________ Tom Church |
|
Back to top |
|
|
TriassicDoc El Presidente
Joined: 25 Mar 2007 Posts: 1235 Location: Poughquag
|
Posted: Wed Apr 27, 2011 4:11 pm Post subject: problem solved |
|
|
oh I am so retarded...
just for posterity: the problem was that one of the washers was on the wrong side of the fork. The person who put the washers in told me what to do and I put the washers on the inside of the fork (one wants to be on the outside) and it's a very happy wheel now! |
|
Back to top |
|
|
paetersen
Joined: 23 May 2009 Posts: 247
|
Posted: Thu Apr 28, 2011 10:50 am Post subject: Re: problem solved |
|
|
creseis wrote: |
oh I am so retarded...
just for posterity: the problem was that one of the washers was on the wrong side of the fork. The person who put the washers in told me what to do and I put the washers on the inside of the fork (one wants to be on the outside) and it's a very happy wheel now! |
You still shouldn't need washers with the q/r. Something is not quite right about that. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|